• Cannot connect RC72 remote to LG 42LD450 TV

    I have a Genie Mini connected to an LG 42LD450 TV. I am attempting to program the RC72 Genie remote to this TV and none of the LG TV codes in the remote setup menu are working. I was able to use code 10178 on my other...
    jhanseling
    last modified by jhanseling
  • Programming Genie remote RC71

    Have new Genie equipment and need help programming remote. Installer programmed remote to turn on/off DVR and TV and to control volume of Denon receiver. Want to program remote to turn on/off Denon receiver, and also ...
    nanak
    last modified by nanak
  • Remote control issue using a TERK.

    I have an HD receiver in my main tv room. I use a TERK to send the signal to my bedroom. Both TV's are HD. Lately my remotes originally programmed for each room started acting up. I've reset and reprogrammed them (RF)...
    hifromkate
    created by hifromkate
  • Samsung TV "Power Cycle" vs "On/Off"

    I have a new RC71 that I programmed to work with my Samsung LN52B750U1F, the problem is that pressing the "On" button just sends the "Power Cycle" command to the TV, resulting in my TV shutting down.  On my old r...
    thestressmachine
    last modified by thestressmachine
  • DirecTv code to program Insignia NS-WBRDVD2

    I can't seem to program my DirecTv remote for my Insignia Blu-Ray (NS-WBRDVD2).  What is the code? I have a RC65 remote.
    gmuzzi
    last modified by gmuzzi
  • Help....electronically challenged

    I just got the upgraded DVR.  I used to be able to control the volume from my Direct Tv remote.  Now I can't.  I have a LG NB3530A sound bar.  Any help will be greatly appreciated.
    momdez
    last modified by momdez
  • Unable to fast forward during commercials

    I have the HR44-700 Genie and mostly watch recorded TV series. I just found that I could not skip commercials while watching "Marriage" recorded from the FX channel. An error message appears that says "this program ca...
    cmpoel@gmail.com
    last modified by cmpoel@gmail.com
  • Vizio Sound Bar Not working with Directv Remote

    Hello - I have a Vizio Sound Bar (VSB211) and can't get this working with my Directv Remote (RC64R).   I used the codes of 31517 and 32454 as suggested by Directv but neither works with the AV2 input.  Vizi...
    tequila44
    last modified by tequila44
  • Remote control for Genie pauses and queues up commands

    I have the following:   Gene HR34/700 - running soft are 0x8d4 Direct TV Universal Remote (I do not know the model number - I have the same one for an HR24/500 DVR - it is also on this web page: http://www.dire...
    mconwell
    last modified by mconwell
  • Remote not skipping ahead

    direct tv must have changed their software.  I can no longer skip ahead more than 30 seconds to skip ads.  Also there is a new addition on the screen when you press the skip ahead button once.  It now s...
    j50sadie
    created by j50sadie
  • How can I separately control several d12 receivers that are close to each other like a dialysis clinic?

    I have a clinic with 20 d12 receiver. They are on TV sets and they are close to each other. I need to code every other remote dif so that one patient doesnt change the ch on the next patients receiver. How can that be...
    cliff.chephard
    last modified by cliff.chephard
  • RC65x remote not working

    We have had this remote for about a year with no issues.  Noticed yesterday some of the buttons were not working (volume down, #7, up button over the select button).  I have tried to reset it (mute + select)...
    luvthat48
    last modified by luvthat48
  • I have the hr34 genie.

    Will the new genie remote work with this? When I go to add accessories, it is not listed with the available items to buy.
    ghardenbrook
    last modified by ghardenbrook
  • hr34 not responding readily to remote

    My hr34 often fails to respond to the remote, often despite repeated attempts.  This happens with the DTV remote and also the universal remote.
    ghardenbrook
    last modified by ghardenbrook
  • getting rid of closed caption?

    How do you do this with the regular remote?
    carriebo
    last modified by carriebo
  • Do you have the code to program a vizio tv model E650i-A2

    Do you have the code to program a vizio tv model E650i-A2 so remote will control volume and on & off? Tried the codes under program remote and those codes did not work.
    pritch
    last modified by pritch
  • WHY in the world would DirecTV make new remotes (Genie Upgrade) that DO NOT LIGHT UP in dark??

    I upgraded to Genie & received 2 new remotes...BOY how short sided was someone in YES IMO creating a better remote but virtually USELESS when using in the dark.  I cannot see anything on it.  It's a clus...
    vinnyvegas
    last modified by vinnyvegas
  • Genie remote code for Sony STR-DH540

    i'd like to have the Genie remote work the volume for a Sony STR-DH540. I do not want it programmed to work my Samsung HDTV because anytime the Genie is turned off, the tv turns off as well. that doesnt work for me be...
    donutpower
    last modified by donutpower
  • genie remote doesn't work

    Changed to whole house DVR last week and new remote in one of the bedrooms worked perfectly until this morning. It is now simply dead. No keys respond. No lights come on. The batteries are good. There isn't a model nu...
    jimidb01
    last modified by jimidb01
  • List Button shows To Do List

    My LIST button now displays the 'To Do List' on secondary receivers.  How can I fix this?  I've tried resetting the main box, but no luck.
    terrymartintx
    last modified by terrymartintx