In most cases you just unplug the HDMI cable from the back of the TV and plug it into the new TV then set the HDMI input to that input on the TV, then you have to reprogram the remote to the new TV.
Did the DVR connect to the old TV by HDMI or was it an older TV that didn't use HDMI?
Usually just plug the same cord into the new TV like the old one and then make sure TV is on the correct input. However there might be some small settings to change depending on what the old setup was.
Accepted Solution
Official Solution
shannon02
ACE - Expert
•
17.6K Messages
4 years ago
In most cases you just unplug the HDMI cable from the back of the TV and plug it into the new TV then set the HDMI input to that input on the TV, then you have to reprogram the remote to the new TV.
0
BlancaPR
Contributor
4 years ago
Thanks I just did that working fine. Good nite 🤗
0
0
Juniper
ACE - Expert
•
18.1K Messages
4 years ago
What model is the DVR?
Did the DVR connect to the old TV by HDMI or was it an older TV that didn't use HDMI?
Usually just plug the same cord into the new TV like the old one and then make sure TV is on the correct input. However there might be some small settings to change depending on what the old setup was.
0