Welcome to the DIRECTV Community Forums - connect with users, ask questions, and find answers!

R

New Member

 • 

6 Messages

Wed, Nov 24, 2021 7:45 PM

Tcl50s431 program remote

I can’t get my rc65 remote to pair with my tcl50s431 tv

litzdog911

ACE - Sage

 • 

40.8K Messages

3 d ago

What DVR/Receiver model number do you have?

New Member

 • 

6 Messages

3 d ago

H23-600

DIRECTVhelp

Community Support

 • 

12K Messages

3 d ago

Hey @Ryandengland, we're here to help you!

Please try the following steps to program your remote:

  1. Press and hold MUTE and SELECT buttons simultaneously. Release the buttons after the green light at the top of the remote flashes twice.
  2. Enter the 5-digit code 11756
  3. Aiming the remote at the television, press VOLUME UP. (If the volume doesn’t increase, try a different code and repeat steps 2-4. The DIRECTV website has a list of instructions to scan for additional codes. When the volume increases, proceed to step 4.)
  4. Again pressing MUTE and SELECT simultaneously, look for the green light at the top of the remote control to flash twice.
  5. Using the remote control keypad, enter the number 960. The same green light on the remote should flash twice again.
  6. Move the MODE switch to the DIRECTV position.

    Let us know how it goes!

    Johnatan, DIRECTV Community Specialist

New Member

 • 

6 Messages

2 d ago

Thanks however this has been tried numerous time but does not work

teetertotter

ACE - Teacher

 • 

233 Messages

2 d ago

@Ryandengland Did you try this route:  Menu>settings>Remote,  etc.

How did you go about trying to set up?  Need more info.  Have the right TCL code[s], for example?  

This page might help with the codes and scroll down to TCL

TV Codes for DirecTV RC64, RC65, RC66, RC32, RC24 Remote Controls (eliztech.com)

New Member

 • 

6 Messages

2 d ago

Used the steps above

  1. Press and hold MUTE and SELECT buttons simultaneously. Release the buttons after the green light at the top of the remote flashes twice.
  2. Enter the 5-digit code 11756
  3. Aiming the remote at the television, press VOLUME UP. (If the volume doesn’t increase, try a different code and repeat steps 2-4. The DIRECTV website has a list of instructions to scan for additional codes. When the volume increases, proceed to step 4.)
  4. Again pressing MUTE and SELECT simultaneously, look for the green light at the top of the remote control to flash twice.
  5. Using the remote control keypad, enter the number 960. The same green light on the remote should flash twice again.
  6. Move the MODE switch to the DIRECTV position.

remote is rc66rx

New Member

 • 

6 Messages

2 d ago

Tried that also and tcl not listed. None of those codes worked either

DIRECTVhelp

Community Support

 • 

12K Messages

2 d ago

Thanks for your response and information provided @teetertotter! 

Hi @Ryandengland thanks for the update. 

Let's please try with 11756 TV code for DIRECTV remote control and TCL Roku TV. 

Let us know how it goes. 

Catalina, DIRECTV Community Specialist

New Member

 • 

6 Messages

2 d ago

This didn’t work either 

DIRECTVhelp

Community Support

 • 

12K Messages

2 d ago

@Ryandengland thank you for trying.

Let's review the information to Reset the remote control you will also find the steps to reset the remote to its default factory settings in case that it's necessary. 

We'll be here to help you.

Catalina, DIRECTV Community Specialist


NEED HELP?

New to the Community? Visit the Community How-To and Guidelines to get started.
New to the Community? Visit the Community How-To and Guidelines to get started.