Get help with your DVR, receiver and satellite equipment.
remote control code?
I need a code for remote control RC32, DVR is a Hughes SD-DVR40. None of the codes in the manual work. Can someone help??
103(s) signal failed.
During setup When I check the signal strengths I get the message 103(s) Signal failed.On 103(b) I get good readings on the first 14, high 80's to the mid 90's. I also have the HR21-200 and it works fine. Almost 8 months now. a year now.
Onkyo TX-SR606 Receiver connection
DVR-R15-100 Sat BoxOnkyo TX-SR606 ReceiverOnkyo DV-SP406 DVD PlayerPanasonic Tube TVWanting to use Onkyo receiver as hub for everything but having problems understanding connections. Has anyone connected an Onkyo to the DVR-R15-100?Thanks.
Software download error
When I turn on the receiver the screen shows "New Software Found" and takes about 5 minutes before an error message pops up and says "Try again, open door on the front and press the reset button". This turns off the receiver but it starts up again and goes through the same sequence. None of the butt
B Band converter and the H21
Direct TV just send me a H21 and during setup both Sat 103's failed.No B band converter was in the box. Is one required for the H21?
Direct TY D10-300 reciever remote code
Unable to control receiver from Panasonic universal remote
Can I install another line with already having service?
Hi, I'm hoping someone can help me out. I just finished my basement and plan on putting an additional TV down there. Right now I have 2 TV's hooked up to Direct TV and I plan on getting a box for the 3rd one. However, Is there an easy way to convert the line I already have, so that I can hook up the
Zinwell WB 68 multi-switch
I am having seemingly random channel/transponder signal deficits: At different times I will get a "searching for satellite" message on a particular channel or a number of disparate channels. When that happens, and I run the tests, a satellite transponder is invariably hitting on "every other" one. T
Loss of Signal - 771 Error
I have an H20 rcvr that works for about 15-20 minutes and then loses the signal. If I reset (red button) or do a hard boot (pwr unplug) it will then run again for a short period. When it functions, I can see that my satellote signal strength (101 degrees) for all transponders is 90-100 (1-32). I hav
771 on many channels
All of a sudden I noticed that on many channels I was getting the 771 message. If I push the reset button, then I get those channels. I do this on a daily basis. We have two other TV that have boxes (1 HD and 1 reg) and they never have problems! What is going on? and what do I do? The guy who instal