Teacher
•
14 Messages
Guide says "Getting Information" for every channel???
There is no program information on the Guide. It just says Getting Information for every channel & we can't figure out how to resolve this problem
Teacher
•
14 Messages
There is no program information on the Guide. It just says Getting Information for every channel & we can't figure out how to resolve this problem
Accepted Solution
Official Solution
_xyzzy_
Expert
•
3.6K Messages
7 years ago
General procedure I always recommend is reboot the dvr (even if the problem shows on a wireless receiver) - pull plug for 15 secs. And if that doesn't clear the problem reboot the gateway (pull plug for 15 secs. and let it fully reboot) and then reboot the dvr again.
1
Anonymous
1.9K Messages
7 years ago
I would reset the AT&T Gateway. That should fix it. If not, reset the actual receiver. One of those two.
1
0
momotwins
Teacher
•
14 Messages
7 years ago
0
momotwins
Teacher
•
14 Messages
7 years ago
0
0
skeeterintexas
ACE - Expert
•
28.3K Messages
7 years ago
When in doubt, reboot!
1
0