‎12qwaszx | DIRECTV Community Forums

USA and SYFY 1124 and 1151 any way to move series record to 1125 and 1152

I no longer have 1124 and 1151 in my guide, they are now 1125 and 1152 so none of my series record will work. Is there anyway to change or move series record channels. Otherwise for the next year I will need to reschedule series when they are availble in the guide ThanksA

Gone in my area (Houston, Texas) also.

Cisco wireless receiver known issue with playback of recorded content

The wireless STB has a known issue that T needs to address. When viewing recorded content, either SD or HD, the message "Press OK to See Your Recording" appears about every 5 minutes in a white box at the bottom of the screen. The only way to rectify is to press OK, which brings you to the recorded

We have the "Press OK to browse..." problem, and we watch almost no HD shows. (Long story.)It was worse with the first wireless receiver we got. Tech support shipped us a second one, which has so far worked somewhat better. (the first one would stay

Cisco wireless receiver known issue with playback of recorded content

The wireless STB has a known issue that T needs to address. When viewing recorded content, either SD or HD, the message "Press OK to See Your Recording" appears about every 5 minutes in a white box at the bottom of the screen. The only way to rectify is to press OK, which brings you to the recorded

Yes, FormerWillyB, now that I have a wireless receiver, I can see that the tech chat rep was mistaken. Luckily, my only use for port 443 is on my static IP addresses.

Cisco wireless receiver known issue with playback of recorded content

The wireless STB has a known issue that T needs to address. When viewing recorded content, either SD or HD, the message "Press OK to See Your Recording" appears about every 5 minutes in a white box at the bottom of the screen. The only way to rectify is to press OK, which brings you to the recorded

Further info:I replaced the supplied ethernet cable to the WAP (direct from the RG) with a newly purchased cable, and we still get the Press OK notice from time to time.Coincidentally, I replaced the HDMI cable from the wireless receiver to the TV (s

Cisco wireless receiver known issue with playback of recorded content

The wireless STB has a known issue that T needs to address. When viewing recorded content, either SD or HD, the message "Press OK to See Your Recording" appears about every 5 minutes in a white box at the bottom of the screen. The only way to rectify is to press OK, which brings you to the recorded

I'm getting the Press OK notice, and my WAP is only six or seven feet away from the wireless receiver. (Close, but no reasonable way to run ethernet.)

Cisco wireless receiver known issue with playback of recorded content

The wireless STB has a known issue that T needs to address. When viewing recorded content, either SD or HD, the message "Press OK to See Your Recording" appears about every 5 minutes in a white box at the bottom of the screen. The only way to rectify is to press OK, which brings you to the recorded

I just had a tech chat rep swear up and down that the wireless receivers did not use, depend on, or interfere with port 443.

DVR recordings all gone post-Disaster Recovery

I have the CIsco DVR and 2 STBs in my setup and the STBs were having issue playing back some of my older recordings for the last week and a half. It seemed to start after changing from a U300 to U200 plan, but that might just be a coincidence. When a recording would not play the STB would attempt t

NotEd, you mentioned wishing you had been able to back up recordings from the channels you no longer have. I was trying to ask if the recordings on which you noticed the initial problems might have been on those channels (in which case you may no lon

DVR recordings all gone post-Disaster Recovery

I have the CIsco DVR and 2 STBs in my setup and the STBs were having issue playing back some of my older recordings for the last week and a half. It seemed to start after changing from a U300 to U200 plan, but that might just be a coincidence. When a recording would not play the STB would attempt t

I thought the reason why you have to be net-connected at playback time was so the DVR could verify that you still had the right to play the program. You may not have that right if you no longer have that channel.Could that be the problem you were obs

SUGGESTION, program the DVR to allow SLOW MOTION!

We just switched over to ATT Uverse 200 last night, and I think we'll be pleased when we get used to the different channel numbers, and learn the new features available. BUT, one thing I MISS already from TIME WARNER CABLE is the ability to rewind live TV and watch something in slow motion, or watc

Seconded.

Engagement Stats

0

Likes Received

2

Responses

0

Conversations Followed

1

Posts

0

Accepted Solutions