I have noticed that when the HDTV DVR is left on and the TV is off when we turn the TV back on teh screen is Pink or Red. Can anyone explain this?

When I turned on the tv today, the screen was pink.  I reset the genie 2 multiple times and have changed the hdmi cable to a new one but still pink. But it is only pink when I try watching Direct TV.  When I watch Netflix or Prime video, the screen is fine.  It's just pink when I try watching Direct

Turned on DirectTV HDDVR box this morning and had pink tinted screen and no audio. Changed out HDMI cables and still have problem. Running through 5.1 Surround and then HDMI direct to TV and still same thing. Adjusted resolution and still same pink tint with no audio. Please help

All of our channels appear fuzzy and we've tried reconnecting the cables and wiggling them but nothing is working. Our picture is still fuzzy.

Three months ago the screen on one of my four TVs went pink and said the HDMI cables were incompatible. I called support and they told me to change the input from HDMI1 to HDMI2. That worked for about one week and then it went pink again.  I switched cables with a 'TV that is working. The same TV ha

At $280/mo, why is my picture going in and out Fuzzy to clear? All 6 boxes are hardwired to ethernet for goodness sake.

I have had several days of bad weather recently.  I have a few channels that continue to have a fuzzy picture. It is to the point that you cannot watch the program. Is there anything i can do to correct this without having to endure the cost of a service visit to the home?

Getting a fuzzy picture on the distant networks (RV)which I understand is standard broadcast, the TV on another regular receiver( not HD) has a good picture.Installer used HDMI cable, a friend suggested switchingto the red, green, blu cables.

Turned on DirectTV HDDVR box this morning and had pink tinted screen and no audio. Changed out HDMI cables and still have problem. Running through 5.1 Surround and then HDMI direct to TV and still same thing. Adjusted resolution and still same pink tint with no audio. Please help

old Zenith is mirrored to an old Toshiba with fuzzy screen. The old Zenith has some minor video pixel noise issue. Have replaced coax cables. What would you suggest ?

My service has been i for about 3 mos.,and has done this since day one. This doesnt happen every day,but sometimes it does happen every day. While watching the sound starts to get all fuzzy sounding and garbled.It lasts about 10 minutes or so and goes back to normal. You can also make it stop by eit

II have HR 22-100 DVR, Onyko TX-SR604 receiver and Panasonic plasma TV.  The HR-22-100 is the newest item and did not have this problem before it was installed.  Periodically, when I turn system on I get a "no signal" notice very briefly then the TV comes on, but with a pink overcast.  There is pict

About every 3rd. time I turn on my Direct TV/HDTV (Magnavox) the screen has a pink overcast to it, and the DTV remote can not control the sound. I contacted Magnavox about the problem. They had me unplug the power to both the HDTV and DTV, wait a minute and power back up. This fixes the problem, but

I have a Mitsubishi WD-57731. I've connected this to my DirectTV HD20 receiver via an HDMI cable.When I change channels on the receiver, when the screen goes blank from the natural lag of the receiver changing channels, there is a fuzzy noise produced throughout the lag b/w changing channels. The lo

Direct TV stream boxes C71KW-400. 1000 mbps up / 913 down direct connect to ethernet. There are no internet issues, only fuzzy pictures every 3 minutes. I already shut the entire internet down for 5 minutes and restarted. No help.

this happened in Feb'24 and now again for the past many weeks - the screen goes pink and there is no audio. Only way to solve it seems to be to power cycle the mini genie. I also changed the HDMI cable from the mini genie to the TV with a more expensive one. I just called DirecTV and they say that t

Hi, so today we rebooted our HDTV receiver (on accident, someone accidentally flipped the light switch connected to the power strip plugged into the receiver) and when it finally loaded, the picture, and guide, were pink and green! none of the other inputs on our tv have this problem! Any ideas as t

Hi - we have cable on our ROKU tv. it had been working fine and the picture  was clear but when we turned on the tv and went to the cable channels last night, they’re all fuzzy. Remotes work fine,   is fine but it’s now fuzzy on all cable channels. I’m wondering if our house cleaner accidentally hit

Direct Tv was working and then TV went fuzzy as if there is no signal or something.  I checked all the connections - look good.  My other tv's are working fine.  What do I need to do to get back on track?

My receiver reset and now the tv picture is pink and green. The D-tv logo is green. Netflix picture is fine. Over-the-air channels are fine. It is only D-tv channels. All other household TVs/receivers are fine. It is NOT a problem with the HDMI cable. That port on the receiver hasn’t worked in 2 yea