Check to make sure your cables/connectors seem to be OK. Otherwise its most likely your dish is out of alignment. Unless you know how to realign a dish (there are videos on youtube but its not a simple job) you are best as trollgod69 says to call tech support for a service call.
771 Problem Communicating w/ Dish * SWiM power inserter may need to be plugged in. * The network can't detect the SWiM due to power loss to the SWiM. * No SWiM installation is present.
As suggest : Check all Outside RG-6 connections for water damage
TrollGod69
Associated Member
•
19 Messages
5 years ago
Call tech support because you will probably need a service call.
0
0
TexasBrit
ACE - Expert
•
14.1K Messages
5 years ago
Check to make sure your cables/connectors seem to be OK. Otherwise its most likely your dish is out of alignment. Unless you know how to realign a dish (there are videos on youtube but its not a simple job) you are best as trollgod69 says to call tech support for a service call.
0
0
goldw1800
ACE - Professor
•
2K Messages
5 years ago
771
Problem Communicating w/ Dish
* SWiM power inserter may need to be plugged
in.
* The network can't detect the SWiM due to
power
loss to the SWiM.
* No SWiM installation is present.
As suggest : Check all Outside RG-6 connections for water damage
0
0
TexasBrit
ACE - Expert
•
14.1K Messages
5 years ago
no, that would be a 775 error.....
0
0