Contributor
•
1 Message
Double Play
I cannot get the Double Play to work! I hit the down arrow, it says "select another channel", and then when I hit it again, it selects its own channel--I can't get it to let me pick what the 2nd channel will be. I tried doing it from the guide, and that doesn't work either. Anyone have any suggestions? I didn't get a manual with my HD DVR.
Thanks!
kennethi448
Contributor
•
3 Messages
13 years ago
I am currently having the exact same problem as izzy. My remote=RC64R, my receiver=HR22/100, TV=Philips, duration of problem=since I learned of 'double play' several months ago, ZIP=18657. Does anyone out there have any solutions to this, or is there anyone out there for whom this feature actually works? Thanks.
0
0
tivoburkee
Professor
•
2.2K Messages
13 years ago
First to enable double-play, you have to press down arrow twice, yes you might be on channel you didn't chose, it can't read your mind, chose a channel by entering the ch #'s, let it switch. Now press down arrow once, you on the ch you started with, if it isn't the second ch of you liking, enter the ch #. Now you are down arrow away from the two ch's of your chosing, left alone it will now buffer them.
0
0
kennethi448
Contributor
•
3 Messages
13 years ago
tivo -
You're a genius. Your solution works perfectly. Thanks much. Now, if the Directv 'former of messages' would just read and copy your instructions in their next message on the use of this feature, it might save much angst 🙂
Ken
0
0