Contributor
•
2 Messages
Extreme slowness when using remote
This has been happening off and on for awhile now but today its been really really bad. All functions from the remote are slow. I have tested 2 remotes and new batteries and same effect happens. Guide seems like it might be OK from local buttons on the receiver but there might have still been some residual slowness from remote commands. it seems like you send a command it will sometimes delay up to and over a minute before performing. While its processing the command no other commands sent will work. The receive light on the receiver will not register.
TexasBrit
ACE - Expert
•
14.1K Messages
14 years ago
See http://forums.directv.com/message/10926427#10926427
0
0
chrischeo4681
Tutor
•
10 Messages
14 years ago
as a home theater tech, this is what i would do
1) double check what your remote is set to in the menu ( ir or rf)
2) it could be light coming from the tv or other stuff in the room, try moving the box around.( i run into this problem alot)
3) worse case if you can upgrade to the rf remote if it works with your box model rc65rbk.
4) it could be a bad box
5) try a different electrical outlet, the voltage coming into a house always goes up and down, if it goes to much one way your equipment might not run very effecient
good luck
0
0