Contributor
•
2 Messages
home theater volume control
I programmed my Yamaha home theater receiver into my remote. The remote is able to turn it on/off and switch speaker channels but when I use the volume control button, the TV volume changes, not the volume on the stereo receiver. The old DVR connect the same way worked fine. Obviously, if it turns on/off it is understanding the signal, is there something I missed in my wire connections or is there something else? I have tried up to 10 of the program codes for Yamaha receivers and nothing changed.
tivoburkee
Professor
•
2.2K Messages
14 years ago
The volume keys never work initially with any audio code, reason is the volume keys won't work at all without a tv code programmed to the tv device. Once there is a tv code, its volume is now in the way, but that can be remedied.
So to get the yamaha volume in just a single device:
1. av1 or av2
2. press and hold MUTE & SELECT, wait for two blinks, release
3. enter 9 9 3
4. press VOL down
In all devices:
1. av1 or av2
2. press and hold MUTE & SELECT, wait for two blinks, release
3. enter 9 9 3
4. press SELECT
0
0
scsmetana
Contributor
•
2 Messages
14 years ago
tivoburkee
Thanks a bunch, it worked!! It's amazing that I spoke with 3 different technical support people over 3 days at DirectTv and not one of them had this as a solution. In fact, they are sending out a new remote as they thought that might be the problem. Thanks again.
0
0