New Member
One of my TVs is not getting a signal from the receiver
Greetings. One of my TVs is not getting a signal from the receiver, but the other two TVs are receiving a signal and working properly.. I have rebooted the receiver but it is still showing no signal. However when I moved it to HDMI 3 Instead of 2 where it was showing programming, it is saying that the tv does not support that program connection and that the HDMI cables may need to be changed. Could you please advise on how to correct the problem? Thanks.
CoastGuy2
New Member
5 years ago
I don't know about your TV, but my Samsung specifically designates HDMI 1 for the TV. I had a similar problem and it turned out the receiver was bad. Directv sent me a new one at no charge, since I had the monthly protection plan. Good luck.
0
0
GH3126
1 Message
16 hours ago
My outdoor TV direct TV signal just stopped working. The other 2 INDOOR TVs working fine. I had the outdoor DirectTV installed after the indoor TVs were installed. I've reset everything and checked all the connections and correct input port. I don't know how the DirectTV install person installed DirectTV on the outdoor TV, but it has a Direct TV box on the back of the TV, and a receiver in the living room that sits next to my indoor receiver.
0
0
bcbsncjlj
ACE - Expert
•
6.2K Messages
15 hours ago
You have commented in a 5-year-old post. Please start a new post.
0
0
shannon02
ACE - Expert
•
20.6K Messages
11 hours ago
DTV receivers are not made for outdoor use.
0
0