Contributor
•
2 Messages
Set up for tailgate
dish: Slim Line SL3PIG-Z
receiver: H24
I am getting error 771a.
When I started setting up the dish, I was using the "signal strength" screen to find my signal. Now, all I get is the 771a error.
Any help is appreciated.
litzdog911
ACE - Sage
•
46.4K Messages
14 years ago
Look at your dish LNB assembly .... does it have four coax outputs or one? If it has just one, then it's a SWM LNB and you need the SWM Power Inserter to power the dish. If it has four, then you probably need to repeat the H24's Satellite Setup and specify "multiswitch" and the correct dish type (03: Slimline - 3).
0
0
reidstav
Contributor
•
2 Messages
14 years ago
It has 4 coax outputs.
I repeated the set up
Dish Type: 03: Slimline-3
Switch Type: 02: Multiswitch
I get a message: ! B-Band Converters required
After verifying configuration I get the message: !A satellite signal could not be detected. Please check your installation and re-test.
0
0
litzdog911
ACE - Sage
•
46.4K Messages
14 years ago
Right. If you want any HD channels, you'll need a BBC Module connected to the H24's SAT INPUT. They're free by call DirecTV.
0
0