Contributor
•
2 Messages
Can't connect to a wireless extender
All I find in the post here talk about pushing a WPS button on the base unit to connect to a wireless extender. My UVerse base unit has no WPS button. Help!
Contributor
•
2 Messages
All I find in the post here talk about pushing a WPS button on the base unit to connect to a wireless extender. My UVerse base unit has no WPS button. Help!
mibrnsurg
Expert
•
4.3K Messages
11 years ago
Go to http://192.168.1.254 Go to Wireless section and disable/turn off Wi-Fi Protected Status, it should connect then. Might need the password, should be on a sticker on the RG. Good luck 😉
Chris
__________________________________________________________
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
or ATT Customer Care (all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
0
0
JB11
Contributor
•
2 Messages
11 years ago
Thanks Chris for your response. Still no luck in connecting. Anything else I can try?
0
0
aviewer
Expert
•
3.2K Messages
11 years ago
While you are in the wireless section, isn't there a WPS section that says enable? After you enable the WPS there is the ability to trigger it (push the button) on the same page.
0
0