New Member
•
6 Messages
I would like to take one of my receivers from my house to my camper on the lake.
I am trying to set up my receiver in my camper and I keep get a swim no detected fault. I would like to know if this is possible. And if so do you have an answer?


detuch254
ACE - New Member
•
5.2K Messages
3 years ago
Yes, it is possible with the right receiver and dish combo. What receiver model do you have? What dish and LNB? If you have a SWM LNB you need a power inserter as well as a SWM-capable receiver. The only exceptions where a power inserter is not required would be the HR54 and H44 because they power the SWM LNB themselves.
If you happen to have an older SD-dish (18 inch or 18x20) then you need to have a non-SWM capable receiver. If the non-SWM receiver is set for SWM systems, it will show the SWM not detected error. In that case, you’ll need to change the dish configuration in Satellite Setup.
(edited)
0
0
Mitchpilkington
New Member
•
6 Messages
3 years ago
I have the KVH 72-0900 H24 HD receiver
SL3 slim line dish
SL3 LMB
0
0
Mitchpilkington
New Member
•
6 Messages
3 years ago
At my home, I have 5 receivers. Two are the Genie.
0
0
detuch254
ACE - New Member
•
5.2K Messages
3 years ago
The H24 is a SWM capable receiver. SL3 LNB can be either SWM or non-SWM as well. Does the LNB have the green SWM label? If you are not sure, does it have one output or four outputs?
If it does turn out to be SWM, you’ll need to buy a power inserter 21V on Amazon, Solid Signal, etc.
If it turns out to be non-SWM, you’ll need to go into Satellite Setup on the H24 and select Multiswitch rather than SWM.
(edited)
0
0
DIRECTVhelp
Community Support
•
255.7K Messages
3 years ago
Hi @Mitchpilkington, it'll be a pleasure to help you with the options to set up this receiver in the camper.
Let's meet in a Direct Message to take a closer look on this. Please check your DIRECTV Message Inbox (It's the chat icon next to the bell icon in the upper right corner of the Forums).
We'll be waiting for you.
Johan, DIRECTV Community Specialist
0
0
Mitchpilkington
New Member
•
6 Messages
3 years ago
Sir, it is a one output connector and it does have the green label.
0
0
detuch254
ACE - New Member
•
5.2K Messages
3 years ago
@Mitchpilkington thanks for confirming. Yes, you do have a SWM LNB. In that case, you’ll need to purchase this 21V power inserter to go with your setup:
https://www.amazon.com/Formerly-DIRECTV-Volt-Power-Inserter/dp/B005AME7Y8/ref=sxts_rp_s_a_1_0?content-id=amzn1.sym.37bfdf6c-7ccf-4cc5-bf39-7ab64af31a28%3Aamzn1.sym.37bfdf6c-7ccf-4cc5-bf39-7ab64af31a28&crid=U9B94G3NUQAF&cv_ct_cx=directv+power+inserter+21v&keywords=directv+power+inserter+21v&pd_rd_i=B005AME7Y8&pd_rd_r=e06bb6ce-bf11-4d8e-b015-ba61367ad295&pd_rd_w=xcjYZ&pd_rd_wg=HGeoY&pf_rd_p=37bfdf6c-7ccf-4cc5-bf39-7ab64af31a28&pf_rd_r=MJCT75RC7R3R6YQQR0QE&psc=1&qid=1658842125&sprefix=directv+power+%2Caps%2C181&sr=1-1-470306f1-0dca-446e-a010-67c3e8db9222
0
0
Mitchpilkington
New Member
•
6 Messages
3 years ago
Thanks for the help.
0
0
detuch254
ACE - New Member
•
5.2K Messages
3 years ago
No problem. Please report back if you have any issues or if the problem was solved. Thanks
0
0
Mitchpilkington
New Member
•
6 Messages
3 years ago
Sure will.
0
0
DIRECTVhelp
Community Support
•
255.7K Messages
3 years ago
@Mitchpilkington, we're glad to know you received the assistance you needed. If you have any further questions, please feel free to reach to us. We'll be happy to help you.
@detuch254, thank you for sharing the right information and the prompt response.
Johan, DIRECTV Community Specialist
0
0