5 Messages
Gemini fails to turn TV on/off
My new Gemini system will not turn my TV itself on and off, but it does adjust the volume. After two hours with tech-support, online chat, and finally a phone call to a human being for tech-support, I learned this is a known condition -unfortunately only known by a few technicians.
Prior to the living tech, everything wanted me to re-pair My remote to the box which was totally useless as it didn’t change anything. Everybody was polite, but unhelpful. Final results from the Live technician on the phone is the failure to include old systems in the firmware if. If your TV is not relatively new, you can’t turn the power on and off. My TV is a DYNEX Mdl DX-40L261A12, and is considered too old to bother supporting. The flaw has been known for over two years, but is still un-corrected as the machines have been built and can’t be modified by an update.
The technician told me that if you go to directv.com, select support, then look for “compatible devices” You will find a list of compatible devices that will tell you your TV is too old to bother with (my word not theirs). There appears to be no intent to change this, nor to forewarn you.
Your only options are to buy a new TV or live with the two remotes (When their sale point is to “minimize the number of remotes you need”).
Accepted Solution
Rich_Tech
5 Messages
14 days ago
PS. Just tried to find that so called compatible tv list and dead ended
0
0
shannon02
ACE - Expert
•
20.9K Messages
14 days ago
These are the codes from the DTV lookup website.
TV Codes for Dynex
11463, 11780, 11785, 11810, 12049, 12184
https://www.directhd.tv/directv-remote-code-lookup/
The directions don't seem to be right but you can try them. Not sure if the RC8X can be manually programed.
(edited)
0
0
Rich_Tech
5 Messages
13 days ago
Sorry, that’s for the old Geni remote, not the new Gemini Remote.
0
0
dwanak59
Contributor
•
9 Messages
11 days ago
Nothing worse than using the "chat" feature for something complicated. The amount of time it takes for a response after asking a question leads me to believe they are assisting people other than me at the same time. Many people can multi-task, but only a few can do it well. Glad it all worked in your favor.
0
0
Good4u
Contributor
•
187 Messages
10 days ago
If you have gone through all the Dynex codes you could try some other brands. Give Durabrand a try.
0
dwanak59
Contributor
•
9 Messages
10 days ago
Yes, thank you
0
0
Rich_Tech
5 Messages
9 days ago
Guys, old style remotes let you input codes. Their new remote is too smart for that. They Believe that it knows all and doesn’t need to be told what make and model or what set of codes it needs to use. There is no provision to input anything like that in the Gemini remote. And they have no plan to fix it. their answer is “buy a new TV“ at your expense.
0
0
shannon02
ACE - Expert
•
20.9K Messages
9 days ago
AFAIK the new TVs tell the remotes what the code is not the remote knowing everything.
Have you tried using HDMI-CEC to turn the TV on/off.
0
0
Rich_Tech
5 Messages
9 days ago
HDMI-CEC? I don’t think that’s built into the system. I can use an external remote that is specific for my TV. It’s not that I can’t turn the TV on and off. It’s that their remote, touted for being able to replace all remotes, can’t do it.
0
0
shannon02
ACE - Expert
•
20.9K Messages
9 days ago
DTV calls it HDMI control, what the TV calls it you have to find out.
0
0
shannon02
ACE - Expert
•
20.9K Messages
9 days ago
IIRC the Gemini has it on by default.
0
0