1 Message
HR-54-700
HR54-700
HDMI plugged in (tried 1,2, &3)
SAT-IN plugged in
power plugged in (green light)
switched power strip (few times)
-reset power strip
checked breaker
-flipped it back and forth
no reset or breaker on wall plug
cable does come from wall/ground to splitter
1. to wifi
2. to Directv
tv continues to read no signal on all HDMI channels, even replaced cords.
-what’s the next step?
Juniper
ACE - Expert
•
22.6K Messages
4 months ago
What model TV?
Checked firmware updates on the TV itself?
Did you powercycle the TV as well?
Make sure HDMI-CEC is turned off (if TV has it)
Do other HDMI devices get recognized by the TV?
Have you tried the HR54 with another TV?
Verified the HR54 is powering on, not just sitting in standby?
The power strips are they normal surge protectors or 'smart' power strips?
If you have any Clients (Mini Genie or Gemini) are they working? (if HR54 doesn't work then they cannot, so helps to narrow down where issue is coming from)
0
0
goldw1800
ACE - Professor
•
2K Messages
4 months ago
Does any HDMI input Work on the TV? do you have a DVD player to test the TV HDMI inputs. When you turn on the HR54 Does the Blue light come? Does the Hr54 power the LNB or do you have a PI-29 power supply?
0
0