After following step by step instructions to restart then pressing ok on box no luck many times, then trying unplugging power cords and then trying the restart again still no luck  Sooooo frustrating!

Have a Sanyo DVR/VCR, want to record a DVR, need step by step directions. It was working when I had another service but for the last month haven't be able to record. This is not a AT&T DVR but want to burn a disk for later use

The past week I have noticed on both my HR22 and HR20 systems a 4 step cycle where the picture goes from sharp, to a bit fuzzy, then a tad bit worse, then annoyingly bad quality, then snap back to sharp. The cycle seems to occur once a second. At first I thought I had some interference or maybe a ba

Hello, About 2 days ago our H23-600 decided to reboot and get stuck at the Step 1 of 2 screen "Checking Satellite Settings" and won't go beyond it. I've tried reseting it, unplugging for 30 minutes, forcing a software download (was same version) etc. I even went into the DIAG screen and *EVERYTHING*

Power went out now all my receivers Won’t pass step 1of2 :checking settings almost done

I have not been able to view programming on my HD DVR for over 24hrs.  I have spoken with TSR's and have pressed the reset button, waited, still stuck, unpluged the box for 15 minutes, replugged-nothing, have pressed the reset button then held the menu button and down arrow, nothing, have pressed th

i am seeing fine horizontal lines on my tv some chanels are worst then others you see it in the info banner when you change the channel

Anyone else stuck here.... my dvr wont boot up past this screen. I tried several unplugs and even a reformat attempt but nothing seems to get me past step 1. Any help would be appreciated.

I follow the instructions provided. I choose the correct RF and I go to a screen for instructions I get the first 2 greens and get 2 greens. However on the 3rd step I enter the longer number and press select and I get a red light.

I have 4 units at my house , 1 wired and 3 wireless. One of the wireless units keeps losing signal and I believe it is due being too far away. I have an Ethernet connection available for this unit. Need the steps to allow the unit to go from wireless to Ethernet Hardwired).

Hi, we just had a massive storm here and were without power for over a week. Since the power has come back on I haven't been able to get one of my receivers, an HR22-100 to boot up past the Step 1 of 2 Checking Satellite connection. It will just hang there forever. All my other receivers work fine.

We have 3 DVR's in our house, but since we moved to this house in March of '09 only one has been turned on. Today I decided to turn on another one. Usually when we re=set our DVRS the whole process takes less then an hour. I have been sitting here staring at the TV screen for 3 hours now. Help!?!?!?

2 of my receivers show a message of "select server"?  The other 5 are just fine and my Genie is fine as well?  There is no way to get past this screen???  They were fine this morning....

Hey guys, just a quick question for you fellas that have some experience with mounting these dishes.  I've got a Slimline -5LNB non-swm dish installed right now, and I'm thinking about swapping out the lnb with a 5 lnb swm model, not the whole dish.  I don't own any signal meters or anything like th

Have been using Directv2PC just fine for several months. I have not removed or re-installed the app. Watched some shows on Sunday night. Started the program tonight (Tuesday) and received a prompt saying:1) You must activate CD key by choosing the activate button....Activation Failed. Cause: Activat

I am having trouble getting getting the local channels to come in on my HR22 DVR. I can get them fine on my H23. The signal strenghts on the H23 are all fine (99b, 101, 103b) but on the HR22 the 101 signals are fine but I get nothing on the 99b or 103b. Both receivers are set to the same Dish settin

Fine green line running vertically in middle of screen on all channels.

My U-verse reception is good for about 2 minutes and then it starts with a start and stop routine.    The picture is good and then will freeze and resume after a second or two.  I have rebooted the system and the receiver a couple of times but no improvement.

My genie works fine but clients work intermittently or not at all. The signal seems to be not working properly.

New service as of 5/23/22 ( ship date) and we received 2 C71K boxes. I guess we are being charged 10 dollars apiece for these on an installment plan. Our service works fine without these hooked up. Can we send them back and lose this extra charge per month for these devices? Or is there a benefit to