Need the code for SuperSonic TV Model SC499, using Cable remote S30-S1A

Hello @BrooklynBoy,

We have a guide which informs you how to program your remote.

After following the steps, are you able to view the remote?

Mihai AT&T Community Specialist

@BrooklynBoy,

Use this method to program your remote for TV or Audio device brands that do not appear in the popular brand chart. Before you get started, please be sure to remove the protective battery strip and ensure the device to be programmed is powered on.

1. Point the remote directly at the device you are trying to control/program. Press the Menu and OK keys simultaneously for three seconds until the Power key flashes red twice to confirm that you are in Program mode.
2. Press the On Demand key to program your TV or the Interactive key to program your audio device.
3. While pointing the remote at your TV, press and hold down the Fast Forward key. It may take a few minutes for the device to respond.
4. Choose one:
   • TV programming: Let go of the Fast Forward key as soon as the TV turns off. Press the Power button to turn the TV back on.
   • Audio device programming: Let go of the Fast Forward key when the device mutes. Press Mute to unmute the device. Use the volume keys to verify that the remote control is controlling the volume.
5. If it does not work properly, repeat this process.

Note: When using Auto Code Search, the remote will test a code and flash the Power key once every three seconds to give you time for your device to respond and for you to release the key. Hope this works. Lafayette, AT&T Community Specialist