I have an HR22/100 feeding an Integra 40.2 processer/preamp. I am getting an intermittent sound out of all speakers that sounds like white noise. It happens intermittently with no apparent trigger and the noise only lasts about 10 seconds and it then reverts to normal sound. It is not happening when

On two of the three TV's I have DIRECTV on there is a "white noise" line at the top of SOME not all Standard Def channels.  Any idea on how to fix this?

My DVR's blue power light and yellow record light are blinking, accompanied by soft clicking sounds. I've unplugged it, leaving it unplugged for a day. I've pressed the reset button. I've verified that everything is exactly as the installer had it. It was working fine the first two months, now, just

I have a Mitsubishi WD-57731. I've connected this to my DirectTV HD20 receiver via an HDMI cable.When I change channels on the receiver, when the screen goes blank from the natural lag of the receiver changing channels, there is a fuzzy noise produced throughout the lag b/w changing channels. The lo

I have a RC65 white remote that will not work at all with my receiver . I have turned down the back light on my T.V and i have tried switching to RF but nothing works. anyone have any ideas how to fix this?

The Broadband 2 light is blinking red continuously. We lost service last night for about 10 minutes. It's has blinking continuously since then. The remotes won't work to change the tv. When I press any button on the remote, the closed captioning options come up immediately, every time.

I just set up a spare remote to replace one that quit working. The remote new remote does operate all the Panosonic TV functions. BUT, when I shut the TV off there is a white scatter and a terrible noise just before the TV shuts off. I have tried everything I can think of to correct this with No suc

The Cisco IP TV Receiver ISB7500 (set top box) makes a noise from the fan when turned off. The green Link indicator light stays on when the set top box is turned off. Is this a defect in the peripheral? Model: Cisco ISB7500

it was working yesteday morning when i took the kids to school. came home blue circle was on and the record light . would not turn on. just a blank screen. tried reseting with red button and the blue circle light whent out not record. still nothing. tried several times to no avail. so i unplugged th

Hello,We got DirectTV service in December. It's a standard DVR. There has always been a background hissing/static noise on all channels. The actual program's sound is fine; in fact I'm loving the surround sound. But during quiet moments in a program's dialogue/music/sound, there is a distinct hissin

For the past month I have had issues with my U=Verse. We have replaced the gateway and both receivers. After replacing the gateway one of the new receivers began to work but not the primary receiver. This receiver will only give a single white gear on the screen with no movement at all. The link lig

My HD DVR receiver has started to make a grinding noise.  It started the other day when it was off.  Sometimes the noise is there, sometimes not.  It also makes the noise now when it is on as well.  We are not having any problems (yet) with our reception.  The noise reminds me of when the hard drive

We've had our HR21 DVR for over 2 years now and have been happy with it.  About three weeks ago it began occasionally making a growling noise similar to when a hard drive goes bad in a computer. The noise usually only lasts 5 minutes so I've been ignoring it until last night when access to my record

I noticed that when there is a power outage, the blue light comes on, on the various DVR's that I have. The blue light comes on, whether or not the television is on. Does this routinely occur, following either a power outage or surge? I've noticed the blue light on other occasions in the morning, wh

We have 3 Genies. Currently only 2 will work. The other just displays a white screen. It rotates from Genie to Genie. Any idea on how to solve the problem?

When I change the channel the receiver makes a grinding noise ... and there is a static noise on the TV and the volume is low

Broadband 2 light has been blinking red for several weeks. Rebooted gateway several times.  Uverse viewing is pixalated and freezes frequently.  Is this an equipment issue?

I have read the post about the problems with the white lines on the screen. I have not had any electrical work in my house and the reciever has not been moved since installation 2 years ago.

I have 2 HR21 DVRs and when they are turned off they both make noise like a PC would when searching its HD. Is there any way to stop this and is it normal???Thanks