Satellite Equipment

I got a satellite upgrade and it's the HD SL3 satellite. I have 3 HR24 receivers and they all work with the new satellite. The DTV tech put in a switch that splits the RG6 cable to multiple RG6 lines. I want to move one of the HR24 receivers to another room. The cable to the other room is RG6. Howev

I recently had to get a new genie 2 and it took a while with tech support to connect my mini to it but it finally worked. However they could not help me connect my Gemini to it as well. Nothing has moved positions or wiring or anything it just keeps giving me the 615 error message. The dash then 987

We have a DirecTV Genie and two mini Genies. A couple days ago the software updated. Since then we've been having issues with pixelation and cutting out, like happens during storms (but there are no storms). I troubleshooted yesterday and even had DirecTV support run tests with no success. In my eff

I have an HR24-500 receiver and a TracVision TV3 dish. When I recently restarted the system after being away for a while. I refreshed the receiver via my account. Then when I restarted the system, the receiver got stuck on acquiring guide data. I have power cycled the receiver, restarted via the red

Just purchased a brand new Samsung QN65S90DAFXZA and I tried all 53 Samsung codes with the receiver and none of them will control our new TV.... maybe it is time to cut the dish.... not using 2 remotes... Is there still any good 'learning' remotes on the market? I remember 20 years ago I had a touch

I have two different Samsung TVs in my Man cave connected to two different Gemini boxes and two different Gemini remotes. I’ve paired each remote with its corresponding box. However either remote will turn on both boxes and both TVs. Is there any way to keep one remote from turning on both boxes and

Test ran on the receiver says can’t detect the swm adapter not having a spare I swapped out the lnb but same results. I took the swm adapter to another location and it works fine.

What satellite is 359 on?

When turning on my TV lately I get "The receiver reboot process is nearly complete". This will go on and on until I finally reset the receiver. This is a Gemini receiver. Any suggestions? Thanks

Hi, I have 3 HD24 receivers. None of them receive local channels (channels from 2 to 69) because DTV discontinued local signals on my SD satellite dish. I received permission to be able to get on the roof and replace the dish to an HD/MPEG-4 dish. If I do replace it, can I still use my HD24 receiver