I attempted to add watch tv to one of my mobile devices not knowing it would shutdown my U-verse streaming for AlI my devices. I need watch tv steaming removed from my member ID and U-verse streaming restored. Or change my member ID and reconnect it to my U-verse

After watching the first three episodes of The Alienist season 1 on Channel 1245 (an On Demand channel), I found that the balance of the episodes for that season weren't accessible On Demand. Did I miss something or was there something else I should have done to view these episodes? I can't understa

I am trying to align my dish since the roofers came and moved it and the next available service date is 9/21.  I have gone up and moved it side to side and up and down slowly and still get all zeros on the signal strenght page on 101.  Does this mean I would need to move it much more?  The roofing c

Had some strong winds this week and the dish is out of alignment. My question in the Directv set up has these listed (photo attached also) Azimuth 229, Elevation 40, Tilt 56° Are these the coordinates I need to use? My husband passed away in December and this was something he always realigned.

Had a new roof put on and they got the alignment close but I lose signal easily. What can I show on the screen while I align dish to optimize?

I am getting freeze frame from the hd channels, weak signal from sat 103 and 99. I want to do the dish alignment by myself, I got the dish pointing info from my receiver, but how to align the dish? Thx

What is the best methodology for ensuring your dish has the best alignment in the right azimuth? I am installing a new AUS-9 dish and am having problems getting the azimuth set properly. I should be aligned at 224 degrees per my recievers based on my location. I've tried using a compass to line up t

Bear with me, because I am new to this stuff, but in this modern day and age, it seems like the dish alignment procedures are kind of behind the times. Someone can make a lot of money by putting a motorized alignment device on antennas that works automatically. It would have to be OEM's to the origi

I have my 101 sat aligned solid (90s - 100) and when I have my 99 sat in the 90s my 103 sat goes to all 0s. When I re-align to get my 103 sat back int the 90s all of my sat 99 signals go to all 0s. It's like I can have either my sat 99 OR my sat 103 but not both, anybody have any ideas on this one??

I've lost all signals on Satellite 103.  Before adjusting, only some channels were having problems.  Now that I've adjust the alignment, I can't get any channels on 103(cb). I've got weak but O.K. signal strength on 119Strong on 110Good (high 80's to mid 90's) signal strength on 101All 0's on 103(cb

Recently had some roof work done and before we knew it, the guy took the dish off the roof.  I have remounted the plate and got the pole straight.  I put the dish back up and have tried to align it, but am not getting the signal.  I am only worried about getting Sat 101.  My Zip Code is 43616.  I ha

1) What would be a inexpensive meter not a $700.00 one to point dish? 2) compatible LNB's list? Seems SL3-SWM new one does it all? 3) Why did the alignment change when dish has not moved? Did satellite move a tiny bit? 4) some of satellites are not available on setup: 99(CB) transponders 4,5 =0 &nb

So up until yesterday I've not had any issue, but all of a sudden some of my HD channels started to report signal issues. Then after a few more hours, the more of them were out.  I still have some but not all of them. So, I'm not sure if this is an alignment issue, cable, hardware or something

Just like the title says.... for some reason whenever I put my Amplifi Alien in the mix it causes my Uverse TV to freeze up. I had this problem two months ago and disconnected the Alien and thought maybe since some time had passed and a new firmware update had came out it may have fixed the problem

Will the tech automatically do a Dish Alignment as part of the WHDVR install?  The reason I ask is because I had noticed a lot of 771's  even in light rain.  I decided to run the Sytem test and Ithe results show a "Satellite Dish Alignment Problem." Do I need to call and specificaly request this? BT

After today's wind storm my satellite is not receiving consistent satellite signals. Here are the readings while it was working, then every so often the channel changes itself to MSNBC (oddly enough). I assume this is just due to the storm, but I think it may have knocked my alignment off. How can I

So up until yesterday I've not had any issue, but all of a sudden some of my HD channels started to report signal issues. Then after a few more hours, the more of them were out.  I still have some but not all of them. So, I'm not sure if this is an alignment issue, cable, hardware or something

I have H21 receiver, HD subscription, and a slimline 3 LNB dish with a multiswitch. I am trying to align the dish myself, (I know it is difficult and I know about service call from Directv)My question is I can see some HD channels but not all of them. I know that my satellite strength is lacking in

I am trying to find steps to align the dish myself. Are there any screen shots anywhere. Thanks

A few HD channels are exhibiting freezes and I am suspicious if the dish was properly aligned, when installed a few days ago. Here are my signal levels:Satellite transponders (32 total at 101º)1-8 96 96 92 87 94 98 94 989-16 96 98 96 81 96 100 94 10017-24 94 94 94 81 96 100 96 9825-32 94 98 94 78 96