U-verse TV Equipment

Replaced 2x already. I’m grandfathered in meaning I don’t pay for the receivers. Once again I have big time issues with my receiver. 11:01 it went down every night...I rebooted. Sometimes it works once, but sometimes need to reboot many times. I just dealt with it. But, sporadically a dialogue box w

A few months ago, we scheduled a move with our AT&T services that we had for year(s) prior to the move. The move was only to a different unit of the existing community that our AT&T services were established at, just a 3-digit change to unit number in address. No problem. Our AT&T services was cut o

After a residence power failure, the second receiver will not start. The Power light blinks; however, the Link light does not illuminate. I have disconnected its power and re-connected. I rebooted the Gateway, too. The primary receiver (i.e., the one with the DVR) worked before rebooting the Gateway

In my NVG 599Router under Diagnostics - Logs - System Log I have always been receiving the attached messages. The lights on VAP are Link blinking green and Paired blinking green. This is been going on for years. I only have one wireless set top box linked. I have fixed the IP as 192.168.1.215. There

My receiver suddenly is rapidly and continuously blinking and won’t turn off. Have tried unplugging. Does it need to be replaced?

I get a message uverse not available at this time please try again later. I've restarted everything many times with no results. Any ideas?

@madmax988 yes I am in Miami, Fl. and have UVerse Internet, still waiting for fiber in my neighborhood!

TV will not come on and say "Uverse not available" restart receiver. Have restarted several time and nothing. Same problem last week and a tech restarted remotely. They just upgraded us to fiber optic cable on Tuesday.

I've tried several of the U-verse boxes of different models and ages to feed our programming signal into our new NAD M17v2i surround processor and we get a blinking of our video feed on screen with all of them. The blinking is intermittent. Sometimes several minutes go by before a blink will occur,

Receiver broke. AT&T sent new one - it did not work. Service person spent 4 1/2 hours here trying to get it to work. Finally he found out that I have to have model 8005 or 7500 and he told me to call support to request that. I called support and they are so annoying and completely stupid I cannot ha